Fence Replacement Cost Considerations

You may need to remove shrubs and trees on your property before replacing your fence.

A fence is an important part of your property. It marks your property boundary, keeps unwanted visitors and critters out, and adds to your home’s overall look. However, every fence needs to be replaced at some point.

If your existing fence is breaking down or simply doesn’t fit the rest of your property’s look anymore, you might be concerned about how much it will cost to replace it. You could try Googling how much it costs to replace a fence, but the truth is that there are many different factors that impact the final fence replacement cost.

In this guide we will go over each of these fence replacement cost considerations to help you come up with a good estimate for how much the replacement will cost.

1. Location

Your property’s location will impact the total fence replacement cost. For example, if your property is located on the opposite end of the state from your chosen contractor or the fence material supplier, you will likely end up paying higher contractor fees and material costs due to added fuel and transportation costs.

For this reason, it is best to choose a contractor and material supplier within your city. So if your property is located in Fort Worth, TX, you should choose a fence contractor such as DFW Fence Contractor.

2. Property Condition

Your property’s condition could also drive up the total fence replacement cost. For example, if you have acquired an old property that was poorly maintained by its previous owner, there may be shrubs and trees growing close to or against the existing fence. Similarly, the soil around the fence may have also become uneven over time.

In both these scenarios, your property will need to be fixed up before the fence replacement can begin. Depending on how long it will take to remove the shrubs and trees or fix the soil, you may need to end up spending an extra few hundred dollars. These costs may run much higher if you have a large property that requires more significant changes before fence work can start.

3. Fence Material

Modern day fences can be constructed from different types of material. There’s wood, vinyl, aluminum, iron, and composite, each of which cost different amounts.

A rough estimate of each material’s cost per linear foot is described below:

  • Wood: $14 to $31
  • Vinyl: $17 to $38
  • Aluminum: $27 to $55
  • Iron: $28 to $56
  • Composite: $26 to $57

As you can see, the cost of different build materials can vary by quite a bit. Wood and vinyl are the cheapest options for a replacement fence while aluminum, composite, and iron are pricier.

4. Fence Dimensions

The biggest factor that will impact your fence replacement project’s total cost is the fence’s dimensions. After all, a long and tall fence will cost much more than a short one that isn’t very long.

This cost difference is due to the amount of material required as well as the amount of time it will take to install the fence. A fence with bigger dimensions will require a huge amount of fencing material as well as many extra labor hours. By contrast, a fence with small dimensions won’t require much material and can be installed in just a few hours, meaning its total installation cost will be low.

If you want to cut some costs in this area, you probably won’t be able to reduce the length of your fence as it is meant to cover your property’s perimeter. However, you could cut back on the new fence’s height. So instead of replacing your four foot tall fence with another four foot tall fence, you could replace it with a three foot tall fence.

5. Lighting

It’s not uncommon for people to install lighting on their fences. This lighting helps illuminate the property’s perimeter at night. It can also add to the fence’s overall appearance.

If you intend to add lights to your fence, you should know that they could drive up your fence’s replacement cost by a fair amount. A two-pack of solar deck lights costs between $20 and $40. So investing in one or two dozen solar deck lights for your fence will add about $200 to $300 to your total fence replacement cost.

6. Utilities

If you live in an area with underground power infrastructure, there’s a good chance that there are power lines or gas lines running under your property, and therefore under your fence. It is important to learn where exactly these lines are before starting any fence replacement work.

The good news is that you can contact your local power company or gas supplier to understand these line locations. The fence replacement contractor will then need to work around these lines when they replace your fence. If the lines are located very close to the fence, it will make the replacement process a lot harder, which can take up more time.

For this reason, you end up spending more if your fence is surrounded by power or gas lines.

Why Choose DFW Fence Contractor?

The fence replacement cost considerations described above indicate that it isn’t always easy to predict how much it will cost to replace your fence. Therefore, it is best to discuss your fence replacement with an experienced professional, such as the ones over at DFW Fence Contractor.

At DFW Fence Contractor, we have helped numerous Fort Worth residents with fence replacements. Our staff are familiar with the ins and outs of the replacement process and strive to do a perfect job each time. Please contact us to learn more about our fence replacement services.